bus motor home - radiator tanks and parts - Washer Bars & Brackets - bus

This bracket has seven 5/16" NC threaded holes along the header, and two 3/8" NC threaded holes and two 5/16" NC threaded holes on the bracket side

6 - 3/8" NC threaded nuts along each side
An angle on the back
A slotted hole on the back
Inner Channel.

This bracket has a cutout in the bracket, on the cutout side the bolt holes have 5/16" NC threaded nuts
4 - 3/8" NC threaded nuts on the back of the bracket
2 - two 3/8" NC and 2 - 5/16" NC threaded holes on the cutout face of the bracket
This bracket has 11 bolt holes that attach it directly to the header

8 - 5/16" NC threaded nuts on the face of the bracket
A boss for a cross bar
A cutout for the CAC casting
Several clearance holes for attaching the bracket to the side frames

This bracket has eight 5/16" threaded nuts on the face of the bracket, a boss for a cross bar, a cutout for the CAC casting, and several clearance holes for attaching the bracket to the side frame

5 - 5/16" NC threaded holes

#BS 030909A - Length: 11 3/4" - 7 BH #BS 030909B - Length: 14 5/8" - 8 BH #BS 030909C - Length: 7 1/2" - 5 BH #BS 030909D - Length: 10 14" - 6 BH

This Bus bracket is used in conjunction with frame #BS7341B and bracket #BS052809D
2 - slotted holes for mounting into the bus
1 bolt hole to attach to the other bracket
Note: brackets are not interchangeable - order left or right accordingly. (left bracket shown here

This Bus bracket is used in conjunction with frame #BS7341B
8 - 3/8" diameter holes to bolt to the frame
1 bushing to accommodate an isolation grommet
Note: these brackets are not interchangeable - order left or right accordingly. (left bracket shown here)

This Bus bracket is used in conjunction with frame #BS7341T
4 - slotted holes to mount to the frame
A bushing to accommodate an isolation grommet

Mounting bracket
Crossbar mount
Several clearance holes for attaching to the radiator

This bracket has a crossbar mount, two mounting brackets, and several clearance holes for attaching to the radiator.

This assortment of angled washer bars matches Bus tank #BS 753 and tank #BS 754.

This bracket fits on the end of Bus tank #BS7435

These brackets are made for Bus side frames. Each bracket is unique, having it's own bolt holes, slotted holes, and notch-outs, designed for specific applications.

H - Air Deflector - 8 bolt holes - 1 bolt hole in opposite angle - 14 1/8" long - 1 pc.
I - Air Deflector - 2 bolt holes - 1 bolt hole in opposite angle - 2 1/2" long - 1 pc.
J - Air Deflector - 12 bolt holes - 4 bolt holes in opposite angle - 2 notches in same angle for hose connections - interchangeable - 3 pcs.
K - Washer Bar - 20 1/4" long - 1" wide - 1/4" thick - 12 bolt holes - 4 pcs.
L - Threaded Bar - 5 5/8" long - 1" wide - 1/2" thick - 3 holes threaded @ 5/16" NC - 4 pcs.

Various clearance holes for bolting to the main radiator assembly
Note: this bracket is paired with bracket #BS091708E

6 - 3/8" NC threaded nuts on a mounting bracket placed on the back
Vvarious clearance holes for attaching to the radiator

Clearance holes to attach to side frames
1 mounting bracket on top
1 air deflection baffle on the inside
1 large cutout for the CAC connection

Flexible rubber strip along the edge
Fits inside CAC bracket #BS090508F

4 - 3/8" NC threaded clearance holes for mounting to side frames
Air deflector on the inside
Mounting bracket

Flexible rubber strip that runs along the edge
Fits inside CAC bracket #BS090508G

H - Air Deflector - 27" long with 16 bolt holes - 3 holes and a cutout on the opposite edge - 2 pcs.
I - Long W/Bar - 25 1/8" long with 14 bolt holes - 8 pcs.
J - Short W/Bar - 7 5/8" long with 5 bolt holes - 4 pcs.
K - Threaded Bar - 7 5/8" long and 1/2" thick - 5 holes threaded @ 5/16" NC - 4 pcs.