lift trucks equipment - radiator tanks and parts - Bolt on Top Tanks - caterpillar
Header: 50.00" x 13.00"
50 Bolt Holes
Cat Excavator Tank Set
Top Tank :
This tank has a pair of 4 bolt flanges tapped to 3/8" NC
Filler neck (must be provided by the customer)
1/8" NPT flange on the top of the tank (for bleeding)
5 bolt flange on the top of the tank
The inside of the tank contains a deflection baffle
Pair of "threaded ears" on the top of the tank for mounting purposes
Bottom Tank :
Single 4 bolt flange with holes tapped to 1/2" NC
Header: 50.00" x 13.00"
2 bolt on flanges
Each 3.00" diameter
1 - 1/4" NPT fitting in center
Header: 41.00" x 7.50"
50 Bolt Holes
Cat Complete Set
Top Tank :
This tank has a 2.25" diameter hose connection
4 - 1/4" NPT flanges
3/4" NPT coupling
Hole to accommodate a fill neck
2.50" NPT coupling on the top of the tank
Deflection baffle with a built-in box for the hose connection
Bottom Tank :
This tank has a 2.50" diameter hose connection
2 - 1/4" NPT flanges
Frames :
10 bolt flange at each end
Bracket along the fan edge for mounting
Header: 40.00" x 90.12"
38 Bolt Holes
Cat Top Tank
This tank has a bolt-up type flange with 4 - 3/8" NC threaded holes, located in the center of the tank, to accommodate a 2.50" diameter hose connection
There are threaded bars welded along the header, each with 4 - 3/8" threaded holes
1/4" NPT flange to accommodate a sensor
Raised filler neck hole in the top center of the tank
Large opening with a threaded stud in the center (typical Cat filler assembly)
Threaded bung on each end each with 5/8" NC threaded holes (for lifting the radiator).
