lift trucks equipment - radiator tanks and parts - Solder on Tank Sets - caterpillar
Header: 22.00" x 4.75"
Caterpillar Solder On Tank
This tank has a 2.00" diameter hose connection
1 - 3/8" NPT flange for a drain
12 plate oil cooler with 16.00" centers (DRC1216PC)
This cooler replaces the original 10 plate 15.50" center oil cooler.
Header: 29.50" x 3.25"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection 4.75" from the edge of the tank to the center of the hose connection
1.37" diameter hole in the top center to accommodate a filler neck
2 - 5/16" NC threaded holes on each end of the tank to attach side frames
Bottom Tank :
This tank is the same as the top tank, except instead of a filler neck hole it has a 1/4" NPT flange for a drain cock on the engine side of the tank
Header: 18.12" x 4.75"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection 7.75" from the edge of the tank to the center of the hose connection
1/2" NPT flange for a sight glass
4 - 5/16" NC mounting nuts to attach side frames
Diffusion baffle
Bottom Tank :
This tank has a 2.25" diameter hose connection 3.75" from the edge of the tank to the center of the hose connection
1/4" NPT flange for a drain cock
4 - 5/16" NC mounting nuts to attach side frames.
Note: this kit comes with a 1/4" NPT drain cock
Header: 29.50" x 3.25"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection
1.37" diameter hole in the top center for a fill neck
2 - 5/16" NC threaded holes at each end to attach side frames
Bottom Tank :
This tank has a 2.00" diameter hose connection
1/4" NPT flange for a drain
2 - 5/16" NC threaded holes at each end to attach side frames
3/4" diameter bypass hose connection
Header: 25.25" x 3.37"
Caterpillar Excavator Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection
Hole for a filler neck
2 - 5/16" NC threaded holes on each side of the tank for attaching the side frames
Bottom Tank :
This tank has a 2.00" diameter hose connection
1/4" flange for a drain cock
2 - 5/16" threaded holes on each side of the tank for attaching the side frames
Header: 29.50" x 6.00"
Caterpillar Complete Tank Set
Top Tank :
This tank has a 2.50"diameter hose connection 3.50" long
1 - 1/4" NPT flange
Bottom Tank :
This tank has a 2.87" diameter hose connection 3.50" long
1 -1/4" NPT flange at each end of the tank
Includes side frames and shroud
Header: 18.12" x 4.75"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection
1/2" NPT flange for a sight glass
4 - 5/16" NC mounting nuts to attach side frames
This tank is 2.00" shallower than the kit #CAT2103CK counterpart
Bottom Tank :#CAT2103B
This tank has a 2.25" diameter hose connection
1/4" NPT flange for a drain cock
4 - 5/16" NC mounting nuts to attach side frames
Header: 28.75" x 4.75"
Caterpillar Loader Tank Set
Top Tank :
This tank has a 2.25" diameter hose connection
4 - 5/16" NC threaded nuts to attach the side frames
1/4" NPT flange for an expansion fitting
Bottom Tank :
This tank has a 2.25" diameter hose connection
1.00" diameter bypass hose connection
3/8" NPT flange for a sensor fitting
4 - 5/16" NC threaded nuts to attach the side frames
Header: 29.87" x 3.75"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection
Mounting block on each end with 2 - 5/16" NC threaded holes
Hole in the top center of the tank for a filler neck
Bottom Tank :
This tank has a 2.00" diameter hose connection
Mounting block on each end with 2 - 5/16" threaded holes
Locating pin to position the radiator into the frame
1 - 1/4" NPT flange for a drain
Header: 16.00" x 5.00"
Caterpillar Solder On Tank
Top Tank :
This tank has a 2.00" diameter hose connection
2 lifting brackets on the top of the tank
1.25" hole on the top for a filler neck
2 threaded mounting nuts on the backside of the tank
Bottom Tank :
This tank has a 2.00" diameter hose connection
2 mounting pins on the bottom of the tank
1/4" NPT flange for a drain cock
Header: 33.50" x 3.50"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 2.00" diameter hose connection
Filler neck hole in the top center of the tank
Bottom Tank
This hole has a 2.00" diameter hose connection
1/4" NPT flange for a drain cock
Header: 34.75" x 5.00"
Caterpillar Solder On Tank
2 oil coolers mounted side by side with bolt-on type flanges (to be supplied by the customer)
Bolt-on flange connection on the bottom of the tank
Header: 25.00" x 3.25"
Caterpillar Solder On Tank Set
Top and bottom tanks have a 2.00" diameter hose connection
Top tank has a filler neck
Bottom tank has a drain cock
Both tanks have mounting brackets on each end.
Header: 20.75" x 4.75"
Caterpillar Solder On Tank Set
Top Tank :
This tank has a 1.50" diameter hose connection
Filler neck on the top driver side
Bottom Tank :
This tank has a 1.50" diameter hose connection
Hole for a 1/4" NPT flange and drain cock (supplied)
Larger NPT flange.
