lift trucks equipment - radiator tanks and parts - Bolt on Top Tanks - generator
Header: 25.50" x 9.00"
36 Bolt Holes
Cummins 8.3 Complete Set
Top Tank :
This tank has a 2.25" diameter hose connection
3/4" diameter bypass hose
Two 1/4" NPT flanges
Two 1/2" diameter flanges for sight glasses
2.00" diameter pipe on the top for a filler neck
Bottom Tank :
This tank has a 2.00" diameter hose connection
Three 1/4" diameter flanges
Side Frames :
These frames are 44.87" long and 9.00" wide
There are slotted mounting holes top and bottom
Two bolt holes on the bottom
Note: this set comes supplied with four long and four short washer bars
Header: 39.00" x 9.00"
46 Bolt Holes
Generator Complete Set
Top Tank :
The front side of this tank has a pair of 2.25" diameter hose connections
1.50" diameter hose connection
A pair of 1/4" NPT flanges for vents The outer ends of the tank have mounting flanges with three 1/2" holes
The top of the tank has a hole to accommodate a fill neck
Bottom Tank :
This tank has a 3.00" diameter hose connection
A flange for a drain
The outer ends of the tank have mounting flanges with a pair of 1/2" holes
Side Frames :
These frames are 37.00" long
Five 3/8" slotted holes up each side for mounting the fan shroud
Note: this set comes supplied with washer bars.
Header: 32.00" x 8.00"
40 Bolt Holes
This Generator tank set has a top and bottom tank which are identical to each other, with the exception that the top tank has a fill neck hole in the top center of the tank
The tank has a 2.00" diameter hose connection 4.00" long, placed 3.50" in from the edge of the tank to the center of the hose connection
Two threaded bars at each end of the tank for mounting purposes
There are two 3/4"NPT flanges @ 18.00" centers to accommodate sensors, ect.
Side Frames:
These 25.75" tall side frames have 5 bolt holes at each end.
Top Header: 72.00" x 10.00"
Bottom Header: 72.00" x 8.00"
This set includes all washer bars and center bar
The bottom tank has a 5.00" diameter hose connection
The top tank is de-aerated
The side frames are 11.75" wide, and the headers are offset because of the larger header size of the top tank (all components line up on the grill side).
Header: 30.00" x 6.50"
38 Bolt Holes
Generator Complete Set
Tanks (both are identical)
These tanks have a 2.00" diameter hose connection
Two 1/4" NPT flanges
Two threaded bars with two 1/2" NC holes on each end to mount the side frames
Top tank has a hole in the top center for a filler neck
Side Frames :
Each of these frames has eight 3/4" diameter holes to mount to the tanks
Two 1/2" thick feet on the bottom with two 3/4" diameter holes for mounting to the floor
This tank set includes four long and four short washer bars.
Header: 34.00" x 6.25"
42 Bolt Holes
Generator Complete Set
Top Tank :
This tank has a 2.00" diameter hose connection
1/4" NPT flange to accommodate an expansion tube
Bottom Tank :
This tank has a 2.00" diameter hose connection
1/4" NPT flange to accommodate a drain cock
Side Frames :
These frames have four 5/16" NC nuts along the fan and grill side
A 8.37" diameter bolt hole flange
Note: this set comes supplied with four washer bars 24.87" long with 13 bolt holes.
Header: 37.12" x 8.12"
48 Bolt Holes
Generator Complete Set
Top Tank :
This tank has a 1.75" diameter hole on the top center to accommodate a truck filler neck
2.25" diameter hose connection
1/8" diameter bypass hose
A de-aeration baffle
A curved bar with threaded holes to attach the engine cover
Bottom Tank :
This tank has a 2.25" diameter hose connection
3/4" NPT flange for drainage
Four 5/8" NC nuts for mounting
Side Frames :
These frames have a 9 bolt hole flange
Five 5/16" NC bolt holes run along the width
3/8" NC nut is in the back center of the frame
Two 5/16" NC nuts are on the back edge
Four 5/16" NC nuts run along the fan side
Three 5/16" NC nuts run along the grill side
Note: this set comes supplied with brackets - two bolt holes on one face, and one hole with 1/4" NC nuts.
