truck - radiator tanks and parts - Bolt on Bottom Tanks - international

This tank has a rectangular flange with four 3/8" NC holes
Two bottom mounting holes @ 26.62" centers

This tank has two rectangular flanges with four 3/8" NC threaded holes in each
Two mounting brackets with a 1/2" NC threaded hole in each
One 1/4" NPT flange
The tank dips in the middle between the brackets to allow for a PTO

This tank has a rectangular flange with four 3/8" NC holes
Two bottom mounting holes @ 25.25" centers
Two corners on the header are rounded off

This tank has a rectangular flange with four 3/8" NC holes
One flange on the side of the rectangular flange housing with two 5/16" NC holes
Two bottom mounting holes @ 25.25” centers
Two corners on the header are rounded off

This tank has a 2.50" diameter hose connection facing the engine
1/4" NPT flange on the rise of the tank

This tank has a 1.25" diameter hose connection straight out towards the engine
1.00" diameter hose connection on a 90o angle facing the engine 5.25" from the driver's side of the tank
A baffle in the tank approx. 1/2" off center that splits the tank left to right
One 1/4" NPT flange on the shallow end of the tank

This tank has a 1.25" diameter hose connection straight out towards the engine
A 1.00" diameter hose connection on a 90o angle facing the engine 8.25" from the driver's side of the tank
A baffle in the tank approx. 1/2" off center that splits the tank left to right
One 1/4" NPT flange on the shallow end of the tank
Note: this tank is a mirror image of tank #IN643-3LF

This tank has a 2.50" diameter hose connection on the passenger’s side of center
One 1/4" NPT flange
The tank is shallow except where the hose connection and flange are located

This tank has a 1.25" diameter hose connection on the passenger’s side
A 1.00" diameter hose connection on a 90 degree angle 8.25" from the driver’s side facing to the center on a 45 degree angle
Two 1/4" NPT flanges
There is a baffle splitting the tank left to right

This tank has a 1.25" diameter hose connection on the passenger’s side
A 1.00" diameter hose connection on a 90 degree angle 5.25" from the driver’s side facing to the center on a 45 degree angle
Two 1/4" NPT flanges
There is a baffle splitting the tank left to right

This tank has one rectangular flange with four 3/8" NC holes
Two bottom mounting holes at 25.25" centers
Two corners on the header are rounded off

This tank has a rectangular flange with four 3/8" NC holes
A flange on the side of the rectangular flange housing with two 5/16" NC holes
Two bottom mounting holes @ 25.25" centers
Two corners on the header are rounded off

This tank has a 2.50" diameter hose connection on the passenger’s side
One 1/4" NPT flange in the center of the tank

This tank has a 2.50" diameter hose connection on on the passenger side of the tank facing up and out at approximately 45 degrees
One 1/4" NPT flange on driver’s side
One 1/8" NPT flange on the bottom

This tank has a 2 1/2" diameter hose connection 8 1/4" from the end, coming out on approximately a 60 degree angle and turned on approximately a 30 degree angle.  There is a 1/4"  NPT flange on each end.

“Low-flow” tank has one 1.25" O.D. and one 1.00" O.D. hose connection 3.00" apart, coming out on passenger’s side
Three 1/4" N.P.T. fittings (2 on tank and one on 1.25" hose connection) One baffle splitting tank front to back