truck - radiator tanks and parts - Bolt on Frame Rails - kenworth
Length: 35.00" Top & Bottom Flanges: 7.37" x 9.00" Kenworth Side Frame
This frame has 12 bolt holes per flange; two threaded @ 5/16" NC, and various brackets along the back of the frame for mounting a variety of attachments (CAC, condensers, etc...), and there are "ears" on the gussets for mounting an oil cooler. Note: this frame matches with tank #KW 5911 and tank #KW 6024.
Length: 32.75"
Top & Bottom Flanges: 7.37" x 9.00"
Kenworth Left Side Frame Rail
Top and bottom flanges have 12 bolt holes each. There is a "Z" bracket, two "ear" brackets and 2 keyhole brackets for mounting a charge air cooler. NOTE: Frames are not interchangeable. Order left or right accordingly. (right frame shown here)
Length: 32.75"
Top & Bottom Flanges: 7.37" x 9.00"
Kenworth Right Side Frame Rail
Top and bottom flanges have 12 bolt holes each. There is a "Z" bracket, two "ear" brackets and 2 keyhole brackets for mounting a charge air cooler. NOTE: Frames are not interchangeable. Order left or right accordingly.
Length: 40.00"
Top and Bottom Flanges: 7.31" x 9.12"
Kenworth side frame
Top and Bottom flangeseach have 12 holes, 10 drilled clearance for 5/16" bolts and 2 tapped 5/16" NC. One "Z" shaped bracket on outside of frame with a 7/8"diameter hole in center. Two brackets welded on side. One on an angle, One straight, with a 3/4" diameter hole in each. Two gussets have keyhole type slots for cross bars. Seven 1/4" NC threadson each side. Fourteen 1/4" NC threads on outside of frame. NOTE: Frame are not interchangeable. Order left for drivers side or right for passengers side or pairs
Length: 40.00"
Top & Bottom Flanges: 7.31" x 9.12"
Kenworth Side Frame
Top & bottom flanges each have 12 holes, 10 drilled clearance for 5/16" bolts and 2 tapped 5/16" N.C. One
Length: 39.25"
Top & Bottom Flanges: 7.25" x 5.12"
Kenworth Side Frame
Top and bottom flanges consist of 10 holes each, all clearance for 5/16" bolts. Various other holes for brackets, shrouds, etc. NOTE: Frames are interchangeable. EARLY MODEL
Length: 40.00"
Top & Bottom Flanges: 7.37" x 7.12"
Kenworth Side Frame
Conventional style - offset headers Top and bottom flanges each have 10 holes, 6 drilled clearance for 5/16" bolts and 4 tapped 5/16" N.C. Fourteen 1/4" N.C. threaded holes on side frame for brackets and shroud, etc. Two brackets welded on side of channel, each with 3/4" diameter hole. NOTE: Side frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs. LATE MODEL
Length: 40.00"
Top & Bottom Flanges: 7.37" x 7.12"
Kenworth Side Frame
Conventional style - offset headers Top and bottom flanges each have 10 holes, 6 drilled clearance for 5/16" bolts and 4 tapped 5/16" N.C. Fourteen 1/4" N.C. threaded holes on side frame for brackets and shroud, etc. Two brackets welded on side of channel, each with 3/4" diameter hole. NOTE: Side frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs. LATE MODEL
Length: 40.00"
Top & Bottom Flanges: 7.25" x 5.12"
Kenworth Side Frame
Top and bottom flanges have 10 holes each, all drilled clearance for 5/16" bolts. Ten holes on back of frame tapped 1/4" N.C. For brackets, etc. NOTE: Frames are interchangeable. EARLY MODEL
Length: 40.00"
Top & Bottom Flanges: 7.37" x 7.25"
Kenworth Side Frame
Top and bottom flanges have 10 holes each, 8 drilled clearance for 5/16" bolts and 2 tapped 5/16" N.C. There are 26 holes on back of frame all tapped 1/4" N.C. Front (grille) side of frame is cut lower to allow more air flow, back (engine) side of frame is 2.00" deep. NOTE: Frames are interchangeable. If there is no
Length: 34.87"
Top & Bottom Flanges: 7.50" x 7.25"
Kenworth Side Frame
Top and bottom flanges have 10 holes each, all drilled clearance for 5/16" bolts. Various other holes for shroud, brackets, etc. NOTE: Frames are interchangeable. EARLY MODEL
Length: 34.87"
Top & Bottom Flanges: 7.50" x 7.25"
Kenworth Left Side Frame
Top and bottom flanges have 10 holes each, all drilled clearance for 5/16" bolts. Various 1/4" N.C. threaded holes for brackets and shroud, etc. One bracket welded on back of channel near top. NOTE: Side frames are not interchangeable. Order left for driver
Length: 34.87"
Top & Bottom Flanges: 7.50" x 7.25"
Kenworth Right Side Frame
Top and bottom flanges have 10 holes each, all drilled clearance for 5/16" bolts. Various 1/4" N.C. threaded holes for brackets and shroud, etc. One bracket welded on back of channel near top. NOTE: Side frames are not interchangeable. Order left for driver
Length: 34.87"
Top Flange: 8.00" x 7.00"
Bottom Flange: 7.50" x 7.00"
Kenworth Side Frame
Top and bottom flanges each have 8 holes drilled to clear 5/16" bolts. Various other holes for brackets, shrouds, etc. NOTE: Frames are interchangeable. EARLY MODEL
Length: 31.75"
Top Flange: 8.00" x 7.00"
Bottom Flange: 7.50" x 7.00"
Kenworth Side Frame
Top and bottom flanges have 8 holes each, all drilled clearance for 5/16" bolts. Various other holes for shroud, brackets, etc. NOTE: Frames are interchangeable. EARLY MODEL
