truck - radiator tanks and parts - Bolt on Frame Rails - peterbilt
Length: 37.50"
Top Flange: 9.62" x 7.00"
Bottom Flange: 7.00" x 5.75"
Peterbilt Side Frame
Top flange has 11 bolt holes drilled clearance for 5/16" bolts. Bottom flange has 8 bolt holes drilled clearance for 5/16" bolts. One angle mount on grille side. Various other holes for brackets, etc.
Length: 37.50"
Top Flange: 9.62" x 7.00"
Bottom Flange: 7.00" x 5.75"
Peterbilt Side Frame
Top flange has 11 bolt holes drilled clearance for 5/16" bolts. Bottom flange has 8 bolt holes drilled clearance for 5/16" bolts. One angle mount on grille side. Various other holes for brackets, etc.
Length: 30.00"
Top Flange: 9.62" x 7.00"
Bottom Flange: 7.00" x 5.75"
Peterbilt Side Frame
Same as model #PB 720 except shorter. NOTE: Frames are not interchangeable. Order left for driver
Length: 37.50"
Top Flange: 13.00" x 7.00"
Bottom Flange: 8.75" x 5.75
Peterbilt Side Frame
Top flange has 13 bolt holes drilled clearance for 5/16" bolts. Bottom flange has 9 bolt holes drilled for 5/16" bolts. One angle mount on grille side. Various other holes for brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
Length: 41.37"
Top & Bottom Flanges: 8.00" x 9.25"
Peterbilt Side Frame
Flanges on both ends have 13 holes, all clearance for 5/16" bolts. One angle on each side, full length with five 1/4" N.C. threaded nuts on each. NOTE: Frames are interchangeable.
Length: 36.25"
Top & Bottom Flanges: 6.50" x 9.37"
Peterbilt Side Frame
Top and Btm flanges each have 12 holes, 2 tapped 5/16" NC and 10 drilled clearance for 5/16" bolts. Engine side of rail is flush with flanges with seven 1/4" NC threaded holes. Six 1/4" NC threaded holes on side. Two brackets on rail - one for CAC and one for mounting pin. NOTE: Frames are not interchangeable. Photo shown is Left side
Length: 36.25"
Top & Bottom Flanges: 6.50" x 9.37"
Peterbilt Side Frame
Top & Bottom Flanges each have 12 hole, 2 tapped 5/16" NC threaded and 10 drilled clearance for 5/16" bolts. Engine side of rail is flush with flange with seven 1/4" NC threaded holes on side.. Two brackets on side - One for CAC and one for mounting pin. NOTE: Frames are not interchangeable.
Length: 36.25"
Header: 6.50" x 9.37"
Peterbilt Left Side Frame Rail
Top and bottom flanges each have 12 holes, ten drilled clearance for 5/16" bolts and two tapped 5/16" N.C. One bracket on side of channel near top with two holes drilled clearance for 1/2" bolts. Angle brackets on each side of channel with 1/4" N.C. threaded holes. Note: frames are not interchangeable. Order left or right accordingly.
Length: 36.25"
Header: 6.50" x 9.37"
Peterbilt Right Side Frame Rail
Top and bottom flanges each have 12 holes, ten drilled clearance for 5/16" bolts and two tapped 5/16" N.C. One bracket on side of channel near top with two holes drilled clearance for 1/2" bolts. Angle brackets on each side of channel with 1/4" N.C. threaded holes. Note: frames are not interchangeable. Order left or right accordingly.
