truck - radiator tanks and parts - Bolt on Top Tanks - volvo
HDR - 37.75" x 7.00"
50 Bolt Holes
Volvo Top Tank
2 Bolt-on Type Flanges w/ four 3/8" NPT threaded holes in each; Bolt-on type flange on top w/ two 3/8" NC threaded holes; 1.25" whole for filler neck on top; 1/2" NPT flange on grille side; bolt-on type flange w/ four 5/16" NC threaded holes on the passenger side in the baffle
43.25" x 7.00"
56 Bolt Holes
Volvo Top Tank
Built in Baffle with twenty three 5/16" threaded holes for the header; Baffle on passenger side with four 5/16" threaded holes; Bolt on type flange on passenger side; two 1/8", one 3/8" and one 1/2" NPT facing the engine; One 1/2" NPT on the grill side beside the filler necl
HDR - 37.87" x 7.00"
50 Bolt Holes
Same as VG 5101-1 except with a baffle splitting the radiator left to right
HDR - 43.25" x 7.00"
56 Bolt holes
One 2.50" O.D. x 3.00" long hose connection straight out on drivers side(10.75" in from the end); two 1/4" NPT threaded flanges
HDR - 43.25" x 7.00"
56 Bolt holes
One 2.25" O.D. hose connection on passenger side 10.25" in to center; two 1/4" NPT threaded fittings
HDR - 43.25" x 7.00"
56 Bolt Holes
Volvo Top Tank
One baffle 7/16" off center of tank; two 1/4" NPT fittings on top 10" in from each side; Matches 517LF bottom tank
HDR : Engine side - 36.25" x 10.00" Grill Side - 34.25" x 10.00"
60 Bolt Holes Top Tank
Two bolt-on type flanges with two 3/8" NC threaded holes in each; one bolt-on type flange with four 5/16" NC threaded holes; two 1/8" NPT fittings; brackets on both ends facing the engine with three 1/2" diameter holes in each; 1.75" hole on top for filler neck; three 1/4" NC threaded nuts on header facing engine
HDR - Engine side 36.00" x 6.62"
Grill side 34.25" x 6.62"
46 Bolt holes
Same as VG 773 but without a PTO cut in out in middle
HDR - Engine side: 44.50" x 10.00"
Grill side: 44.50" x 10.00"
60 Bolt holes Top Tank
Two bolt-on type flanges with four 3/8" NC threaded holes in each; one bolt-on type flange on baffle with four 5/16" NC threaded holes; two 1/8" NPT fittings; brackets on both ends facing the engine with three 1/2" diameter holes in each; 1.75" hole in top for filler neck; three 1/4" threaded nuts on header facing engine
HDR - Engine side: 44.50" x 7.00"
Grill side: 42.50 x 7.00"
56 Bolt holes
Top Tank
One bolt-on type flange with four 3/8" NC threads; two 5/8" NF mounting studs @ 11.00" centers, 2.75" long
HDR - Engine side 44.50" x 7.00"
Grill side 42.50" x 7.00
62 Bolt holes
Top Tank
same as VG 776 but has 62 bolt holes